|
Where smooth finishes
and exact angles are required, 
provides two "Chatterless" style countersinks for the job.
| The CS 6 flute is
indicated for medium stock removal while leaving an excellent
finish. It's your best bet for hard or tough materials. |
NOTE:
90º/82º/60º include
angle are standard. Other angles are available upon
request.
|
|
SHAPE
|
CS
6
Flute
|
 |
|
AEROSHARP
iD# |
HEAD
DIA |
SHANK
DIA |
| CS-250-C |
1/4 |
1/4 |
| CS-312-C |
5/16 |
1/4 |
| CS-375-C |
3/8 |
1/4 |
| CS-500-C |
1/2 |
1/4 |
| CS-625-C |
5/8 |
3/8 |
| CS-750-C |
3/4 |
1/2 |
| CS-1000-C |
1" |
1/2 |
|
|
| We are among the
very few manufacturers which can resharpen "chatterless"
countersinks. We make it work like new again at a fraction of the
new tool cost. |
|
"Chatterless"
carbide countersinks have a flute structure that combines a milling cutter
and a reamer. This gives you fast stock removal and exceptional
finishes. With close tolerance angles built in, these are truly
precision cutters! We use this same principal and apply it to many
types of valve seat cutters, piloted seat cutters, chamfer burrs, and any
application where an angle is generated or finished. |
Also known as
"center reamers" these cutters are a must for reshaping worn
centers where concentricity and exact angles are required.
| The CSE 3 flute is
indicated for medium to heavy stock removal while leaving a good
finish. Best bet for softer steels and metals. |
|
SHAPE
|
CSE
3
Flute
|
 |
|
AEROSHARP
iD# |
HEAD
DIA |
SHANK
DIA |
| CSE-250-C |
1/4 |
1/4 |
| CSE-312-C |
5/16 |
1/4 |
| CSE-375-C |
3/8 |
1/4 |
| CSE-500-C |
1/2 |
1/4 |
| CSE-625-C |
5/8 |
3/8 |
| CSE-750-C |
3/4 |
1/2 |
| CSE-1000-C |
1" |
1/2 |
|
|
We manufacture
many types of lapping and seating cutters!
|
